Gallery

Business Lockout

House Lockout

Car Lockout

Commercial Rekey services

Car Key Duplication

Lost All Keys

Residential Rekey Services

Safe install and open

Residential key extraction

Lock Installation and Repair

How Pro Locksmith Works

Pro Locksmith is a mobile locksmith company based in the Fort Lauderdale area. That means the shop comes to you. Our technicians work out of service vehicles stocked with lock hardware, key blanks, cutting machines, programming equipment, and the tools needed to open, repair, and install locks on site. Whether the job is a front door in Plantation, a storefront in Pompano Beach, or a car parked outside a restaurant in Aventura, the work happens where the problem is, not at a counter across town.

Working this way changes how a locksmith job goes. You do not have to remove a lock and bring it in. You do not have to tow a car to get a key made. And you do not have to wait for parts to be ordered for the most common jobs, because the parts that solve most everyday problems ride along in the van. When something unusual comes up, such as a specialty cylinder, a narrow stile storefront lock, or a key that has to be sourced for a specific vehicle, we tell you up front and plan the return visit so you are not left guessing.

Where We Work

Our service area covers all of Broward County. To the north, we go up through Deerfield Beach into Boca Raton and Delray Beach. To the south, we cover Hallandale Beach, Aventura, North Miami, and the Miami neighborhoods down through Coral Gables and Coconut Grove. Inside Broward, that includes Fort Lauderdale, Hollywood, Pembroke Pines, Miramar, Davie, Plantation, Sunrise, Weston, Coral Springs, Parkland, Tamarac, Margate, Coconut Creek, Pompano Beach, Lighthouse Point, Oakland Park, Wilton Manors, Lauderhill, Lauderdale Lakes, Dania Beach, and the communities in between.

For commercial clients, we extend farther north, up to West Palm Beach, for work on warehouses, retail storefronts, and office buildings. That extended range applies to business work only. Residential and automotive calls are handled within the main area described above.

If you are not sure whether your address falls inside our range, the simplest thing is to call and give us the cross streets. We would rather tell you honestly that a location is outside our area than send a technician on a long drive that makes the job slower and more expensive for you.

What Happens When You Call

Every job starts with a short conversation. We ask what is going on, where you are, what kind of door, lock, or vehicle is involved, and whether anyone is in danger or anything is urgent. Those questions are not a formality. They tell us which tools and parts to bring and whether the job is likely to be simple or involved.

From there, we give you a price for the finished job before any work starts. If the technician arrives and finds something different from what was described, for example a lock that turns out to be broken internally rather than just stuck, we explain what we found and give you the new price before going further. You decide. Nothing extra gets added after the fact.

When the technician arrives, the first step on any lockout or key job is confirming that you have the right to access the property or vehicle. For a home, that usually means a photo ID with the address on it, a lease, a utility bill, or another document that ties you to the property. For a car, it means registration or title that matches your ID. We know this can feel like a hassle when you are standing outside in the heat, but it protects you. A locksmith who opens doors for anyone who asks is a locksmith who could open your door for someone else.

Residential Work, Explained

The services list above names what we do for homeowners. Here is a little more about what each one actually involves, so you know what to ask for.

Rekeying versus replacing

Rekeying changes the internal pins of a lock so that old keys stop working and a new key operates it. The lock body, handle, and finish stay the same. It is the usual choice after buying a house, after a roommate or tenant moves out, or when keys have been lost and you are not sure who has them. Replacing the lock makes more sense when the hardware is worn, damaged, low quality, or when you want a different style or a higher security level. A good locksmith will tell you which one your situation calls for rather than defaulting to the more expensive option.

Keying locks alike

Many homes end up with a different key for the front door, the back door, the garage entry, and the side gate. We can rekey compatible locks so one key runs all of them. When locks come from different manufacturers with different keyways, we explain what can be matched and what would need new cylinders.

Deadbolts and entry hardware

We install and repair deadbolts, knob and lever sets, handle sets, and the strike plates and reinforcement that hold them. In South Florida, sliding glass doors and French doors are common weak spots, and we handle the auxiliary locks and hardware that make them harder to force open.

Safes

We open safes when the combination is lost or the lock has failed, and we can service or change combinations on many models. The approach depends on the safe, its lock type, and what is inside it, so we ask about the make and model when you call.

Commercial Work, Explained

Business locksmith work is a different discipline from residential work. Commercial doors take far more cycles every day, the hardware is heavier, and there are life safety rules about how people must be able to exit. Our commercial clients include retail stores and storefronts, office buildings and suites, warehouses and distribution spaces, and the property managers who look after them.

Master key systems

A master key system lets different people carry different keys, each opening only what they need, while managers and owners carry keys that open more. Designing one well takes planning: which doors belong to which groups, how many levels are needed, and how the system can grow without having to start over. We build these systems and maintain the records that make them useful over time.

Panic bars and exit devices

Push bars on exit doors have to release with a single push from the inside. We install, repair, and adjust exit devices on aluminum storefronts, hollow metal doors, and wood doors, including the outside trim that lets authorized people back in. When a bar has been chained, blocked, or dogged open to work around a problem, we fix the actual problem so the door works the way it is supposed to.

Storefront doors

Narrow stile aluminum doors with glass are everywhere in South Florida retail. They use specialized mortise locks, pivots, and closers that many general handymen are not familiar with. We repair and replace this hardware so the door latches cleanly, locks at night, and opens smoothly for customers during the day.

Business rekeying

When an employee leaves with a key, when a tenant moves out, or when management changes, rekeying restores control. On a master key system, we can often rekey only the part of the system that was affected rather than every lock in the building.

Access control

For businesses that want to stop handing out metal keys altogether, we install and service keypads, card and fob readers, electric strikes, and magnetic locks. These let you add and remove people without touching the hardware.

Automotive Work, Explained

Car keys today are small computers. Most vehicles on the road use a transponder chip in the key head, and many use proximity smart keys that let you start the car with a button. Making a working key means cutting the blade correctly and programming the electronics so the car recognizes it.

We make keys when you have lost every key to the vehicle, add spare keys when you still have one that works, program replacement remotes and smart keys, remove broken key pieces from doors and ignitions, and open vehicles when keys are locked inside. Because the work is done at the vehicle, there is no tow involved. Some vehicles have manufacturer restrictions that limit what any independent locksmith can do, and when that is the case we tell you before you spend anything.

The Hardware We Put On Your Door

Not all locks are equal, and the difference is not always visible from the outside. A cheap lock and a quality lock can look nearly identical on the store shelf, but they behave very differently after a few years of daily use and salt air. When we recommend hardware, we look at how often the door is used, whether it faces the weather, what it protects, and what your budget allows.

For higher security needs, we work with restricted keyway systems where keys cannot be copied at a hardware store or kiosk. Pro Locksmith is an authorized Mul-T-Lock dealer, and restricted key systems from manufacturers like Mul-T-Lock and Medeco give homeowners and businesses control over who can make copies. That matters most for businesses with staff turnover and for property managers who need to know how many working keys exist.

Why Climate Matters to a South Florida Locksmith

Locks here face conditions that locks in drier or cooler places do not. Humidity gets inside cylinders. Salt air, even a few miles inland, corrodes springs, pins, and latches. Summer heat expands doors and frames, and afternoon storms drive water into exterior hardware. Doors that closed fine in the dry season can start to bind in the rainy months.

Because we work in this environment every day, we pay attention to finishes, lubricants, and materials that hold up better near the coast. We also notice when a lock problem is really a door problem, such as a swollen door, a sagging hinge, or a shifted strike, and we correct the cause instead of replacing parts that will fail again for the same reason.

How We Handle Pricing

Our approach to pricing is simple. You get one firm price for the finished job before we start. That price includes the labor and the parts needed for the work we described. If you want to compare options, such as rekeying versus replacing or a standard lock versus a restricted one, we will price each so you can choose.

What we will not do is quote a low number on the phone to get in the door and then raise it after the work is done. That practice gives the whole trade a bad reputation, and it is the main reason people are nervous about calling a locksmith they have never used. Ask any locksmith you call for the full price before anyone is dispatched, and ask for the company name. Those two questions filter out most of the problems people run into.

Who You Will See at Your Door

The person who arrives at your home or business is a Pro Locksmith technician, not a stranger we found through a referral network. Our name is on the vehicle. The technician can explain what they are doing and why, and you are welcome to watch the work. If you are a business owner or property manager who needs paperwork for your records before work begins, tell us when you call so it is ready.

Commitments We Keep

• We tell you the price before the work starts.
• We verify ownership or authorization before opening any door or vehicle.
• We try non-destructive methods first on lockouts and explain before drilling or replacing anything.
• We recommend repair when repair is the right answer, and replacement only when it is.
• We stay within our service area so the technician who comes to you knows the neighborhood.
• We keep business clients’ key records organized so future rekeys and additions are straightforward.

Questions People Ask Before Hiring Us

Do I need to be there for the work?

For lockouts and key jobs, yes, because we need to verify who you are and hand the keys to the right person. For scheduled commercial work, a manager or property representative usually meets the technician to confirm access and approve the scope, and then the work can proceed while the business runs.

Can you work around my business hours?

Many business jobs, like rekeying a suite or replacing a storefront lock, are best done before opening or after closing so customers and staff are not disrupted. Let us know your hours when you call and we will plan around them where we can.

Will you tell me if I do not need a locksmith?

Yes. Sometimes a sticking lock just needs the right lubricant, or a door that will not latch needs a hinge screw tightened. If a problem is something you can safely fix yourself, we will say so. Earning your trust on the small things is how we become the company you call for the bigger ones.

What should I have ready when I call?

Your location, a short description of the problem, and for vehicles, the year, make, and model. For commercial jobs, it helps to know how many doors are involved and what kind of hardware is on them now. Photos of the lock or door, if you can take them, make the conversation faster and the quote more accurate.

Do you only do emergencies?

No. Emergencies are a big part of the work, but a lot of what we do is planned: new locks after a home purchase, master key systems for offices, security upgrades for storefronts, and spare car keys before the last one gets lost. Planned work is usually easier on your schedule and your budget than waiting until something fails.

Getting in Touch

Whether you are locked out, need a key made, want your locks changed after a move, or are planning security upgrades for a storefront or office, the first step is the same. Call Pro Locksmith, tell us what is going on and where you are, and we will tell you what it will take and what it will cost before anyone heads your way.